Guide to Wireless Wi-Fi Networking and How to Set Up in Easy Steps

The wireless technology that connects computers, tablets, cell phones, and other devices to the internet is known as Wi-Fi. Wi-Fi is a radio signal transmitted from a wireless router to a nearby device, which converts the signal into data that can be seen and used. The device receives a radio signal from the router, which is connected to the internet via wire or cable.

A brief history of Wi-Fi

Wi-Fi is a wireless networking technology that uses radio waves to deliver high-speed Internet access. Wi-Fi is a trademarked name that refers to IEEE 802.11x standards. In 1971, a wireless UHF packet network called ALOHAnet was built to connect the islands of Hawaii, giving birth to Wi-Fi. WaveLAN, a protocol created by NCR and AT&T in 1991, was the precursor to the IEEE 802.11 standards.

The Wi-Fi Alliance was founded in 1999 and is the owner of the Wi-Fi trademark. Wi-Fi is defined as any wireless local area network (WLAN) technology that is based on the Institute of Electrical and Electronics Engineers (IEEE) 802.11 standards.

Originally, Wi-Fi was only used to refer to the 2.4GHz 802.11b standard, but the Wi-Fi Alliance has broadened the definition of Wi-Fi to include any type of network or WLAN product based on any of the 802.11 standards, including 802.11b, 802.11a, and so on, in an effort to clear up confusion about wireless LAN interoperability.

What is a Wi-Fi network?

A Wi-Fi network is basically an internet connection shared by a wireless router with several devices in a house or business. The router is a hub that connects directly to your internet modem and broadcasts the internet signal to all of your Wi-Fi-enabled devices. As long as you’re within your network’s service area, you’ll be able to stay connected to the internet.

How does Wi-Fi work?

Although Wi-Fi is commonly used to connect to the internet on mobile devices such as smartphones, tablets, and laptops, it is actually used to connect to a router or other access point, which then gives internet access. Wi-Fi refers to a wireless connection to that device rather than the internet. It also gives you access to a local network of linked devices, allowing you to print photos wirelessly or see a video stream from Wi-Fi cameras without having to be physically connected to them.

Wi-Fi, rather than using physical connections such as Ethernet, uses radio waves to carry data at certain frequencies, most commonly 2.4GHz and 5GHz. Many others, on the other hand, are employed in more specialized environments. Wireless devices can operate on numerous channels in each frequency band, which helps to distribute the load so that individual devices’ signals aren’t overloaded or interrupted by other traffic – though this does happen on busy networks.

In the open air, a conventional Wi-Fi network’s range can reach up to 100 meters. However, because buildings and other objects reflect the signal, most Wi-Fi networks are much smaller. Usually, ranges of 10 to 35 meters are used. The effective range of the network can also be influenced by the antenna’s power and the frequency broadcast. The effective ranges of higher frequencies, such as 5GHz and 60GHz, are much shorter than those of 2.4GHz.

Anyone with a compatible Wi-Fi device who is within a network’s range can detect the network and attempt to join it. It can work in both private and public settings because of this, but it does present security concerns. That’s why security standards like WPA, WPA2, and WPA3 exist, and why resetting your password is critical if you suspect someone is accessing your network without authorization.

What devices use Wi-Fi?

Wi-Fi access points can be found almost anywhere. Wi-Fi connectivity is available on practically all routers, and almost every product with smart functionality relies on it for a stable and reliable internet connection. It’s supported by almost all modern smartphones, as well as tablets, laptops, and some desktops. It can also be connected to computers using USB dongles.

Wi-Fi connectivity is nearly usually included with smart TVs, and many Internet of Things products, such as smart fridges and cameras, do as well. There are Wi-Fi printers, scanners, clocks, game consoles, digital radios, and even automobiles. When you examine the huge diversity of connected services, the application of Wi-Fi is nearly limitless.

There are also what is known as Wi-Fi-enabled devices. These devices employ radio waves that are extremely similar to those used by Wi-Fi, but they aren’t classified as Wi-Fi since they don’t connect to the internet in the same way. The Zigbee protocol, which was established for early low-power smart devices to interact and still persists in certain forms today, is an excellent example. 

Another example is Bluetooth, which uses the same 2.4GHz frequency as Wi-Fi but is designed to link two short-range devices. Then there’s Wi-Fi Direct, which uses Wi-Fi signals to create a private, direct connection without creating a larger internet network.

What are the different versions of Wi-Fi?

In 1971, the first wireless network was established. ALOHAnet was the precursor of modern standards like 802.11 and served as proof of concept for wireless networking in the decades to come.

The first version of the 802.11 protocol, with rates of up to 2 megabits per second, was not released until 1997. Two years later, the speed was increased to 11 megabits per second and 802.11b was accepted. In the same year, the Wi-Fi Alliance was established as a non-profit organization to manage the Wi-Fi trademark, regulate the technology’s growth, and provide a certification procedure for businesses looking to sell Wi-Fi-compatible devices.

Over the last two decades, several generations of Wi-Fi connectivity have been launched. 802.11n, 802.11ac, and, more recently, 802.11ax are supported by the majority of current devices. These innovations provided a wider range of feasible frequencies, as well as larger data speeds, to alleviate network congestion. Today’s fastest can deliver up to 15 gigabits per second.

The Wi-Fi Alliance stated its intention to utilize a new naming scheme for Wi-Fi generations towards the end of 2018. It would begin referring to them with that simple naming scheme with Wi-Fi 6 (802.11ax) to make it easier for the public to understand the capabilities of new standards when they were released.

Types of Wi-Fi connections

As mobile networks spread into the home internet world, your options for connecting wirelessly at home are expanding. Each sort of wireless connection, like internet service, has advantages and disadvantages, such as signal strength and speed. A few of them are listed below.

Wi-Fi Router

In today’s world, most residences utilize a wireless router to connect to the internet. Convenient setup, mobility within range of the Wi-Fi access point (router), and the ability to connect multiple devices are all advantages. The disadvantages include limited capacity and speed as more devices join the same Wi-Fi network, as well as potential interference from other electromagnetic devices in the home.

Mobile Hotspot or Jetpack

Mobile and dedicated hotspots are becoming more popular as a secure way to connect on the go. Your smartphone and a jetpack are two frequent hotspot devices. Today, almost any smartphone or tablet can be used as a temporary hotspot, which is a terrific alternative if you just need it infrequently. It’s simple to use and doesn’t necessitate the purchase of additional devices, but it can quickly drain your battery and data. A jetpack, on the other hand, functions as a dedicated mobile hotspot that, like your smartphone, picks up a signal from nearby cell towers. It can connect to more devices and has a wider range of Wi-Fi. Because it’s a separate device, it doesn’t drain your smartphone’s battery. The disadvantage is that you must purchase both the jetpack and a separate plan from your telecom service provider.

4G LTE Home Internet

If you reside in a rural region with limited internet options, 4G LTE Home Internet is a viable option. It provides high-speed internet access via cell phone towers and mobile networks, with average download rates of roughly 25 Mbps and typically lower latency and more data than satellite. Depending on your provider, the benefits include faster speeds and more reliability. 

5G Home Internet

5G Home Internet has the potential to become one of the greatest and most cost-effective internet services available when it becomes more generally available. It offers a larger capacity than 4G, much quicker speeds (up to 1Gig), and lower latency than what most people enjoy at home, thanks to the use of a new spectrum of powerful radio frequencies across a wireless network.

Book a Demo

Service reliability is often exceptional because 5G wireless base stations are typically placed within 10 kilometers of households. The only significant disadvantage of 5G Home Internet right now is its restricted availability, but that is going to change.

How to get Wi-Fi at home

As previously mentioned, there are various options for obtaining wireless service at your home, most of them are dependent on geographic location and availability. Most of these services are available in most metropolitan and suburban locations, and 5G Home Internet is just around the corner. Satellite and 4G LTE Home Internet will most likely be available in rural locations. You may set up your own Wi-Fi network at home if you have a wired internet connection.

You may share your internet connection with all of your Wi-Fi-enabled devices in your range by connecting a router to your modem. A Wi-Fi extender that transfers the wireless signal to these regions can make a major impact if your house has many levels, concrete walls, or random dead zones.

What are the benefits of using a Wi-Fi network?

Wi-Fi is a popular alternative for residential and business networks because it allows local area networks (LANs) to run without the necessity of wires or wiring. Many modern devices, such as laptops, smartphones, tablet computers, and electronic gaming consoles, can use Wi-Fi to provide wireless broadband Internet access.


What is Wireless Router?

A wireless router, also called a WiFi hub, is a small smart electronic device provided by your Internet service provider that allows you to connect to the Internet. It connects to your home broadband line and sends data from the internet cable to internet-connected devices. Usually, a wireless router has a built-in wireless access point to enable the provision of Wi-Fi. The wireless router or Wi-Fi router is a device with the functions of a router and a wireless router. a WAP(Wireless Application Protocol).

Wireless Router types?

A wireless router is a type of hardware that is widely used in homes. It is the wireless network’s main hub. This device is mostly used by internet service providers to connect their internet cable. It’s also known as a wireless local area network (WLAN) device (wireless local area network). A Wi-Fi network is another term for a wireless network. 

The router’s primary function is to combine the network capabilities of a router and a wireless access point into one device. The hub, like a wired network, is a central point to which all computers are connected to provide network access to computers. Presently available wireless hubs function as routers, however, they are essentially gateways.

Desktop Wireless Router

A desktop Wi-Fi router is the most common way for users to connect to the Internet wirelessly. These routers are modest in size and resemble boxes with an antenna attached. The signal is broadcast by this device at the workplace or at home. The signal will be weak if the user is far away from the base Wi-Fi router. As a result, the office is equipped with a number of wireless routers and range extenders. The Wi-Fi range extender is part of an array that boosts or expands the Internet’s coverage.

What are mobile hotspots and Wi-Fi hotspots?

A mobile hotspot is a standard feature on every smartphone. Once the mobile phone’s hotspot is turned on, the mobile operator can share the network connection wirelessly with other devices, allowing access to the Internet. A portable wifi hotspot is a mobile hotspot that may be accessed through a cell phone carrier. It is a portable device that broadcasts signals via cellular towers.

What are the key features to look for in Wi-Fi routers?

When it comes to purchasing a new Wi-Fi router, you have a lot of alternatives. Look for these five key features as you walk down the aisle or scroll down the page to get the most out of your Wi-Fi router.

Dual-Band Wi-Fi: A dual-band router divides the network into two subnetworks that run at different frequencies: 2.4 GHz and 5 GHz. 5 GHz connections give a faster performance, making them perfect for online gaming and streaming, while 2.4 GHz connections provide better Wi-Fi coverage across the home. Furthermore, routers with “band-steering” look at the devices on the network and direct the older, slower devices to the 2.4 GHz connection while the newer, quicker devices are directed to the 5 GHz link.

Guest Wireless Network and Parental Controls: You can set up a guest network on your router to provide Internet access to visiting friends and family while restricting access to your regular home network. In a similar manner, some routers allow you to set up parental controls or access restrictions that block specific websites or limit how much time a child spends online.

Enterprise Security with WPA: WPA Enterprise-enabled routers provide security by encrypting unique authentication credentials on external systems. WPA Personal Security allows Internet access with a single password.

Data Traffic Indicator: The traffic meter features of a router not only monitor the data consumption of all network devices, both upload and downloads, but it may also alert you when you reach a pre-set bandwidth limit. It can also turn off your Internet connection to avoid overages and extra fees (depending on your service plan).

Power Button: While it may appear to be a minor detail, having a physical button or switch to turn your router on and off might save you from having to wade through difficult configuration options or unplugging your Wi-Fi router when a network problem arises.

Is it possible to obtain a router without WiFi?

Without an Internet connection, you can access your network’s settings, but you’ll require a physical connection to the router. Although you can connect to the router wirelessly, using an Ethernet cable is easier and more dependable if you need to change any of the wireless settings.

How to set up a home Wi-Fi network?

It has become essential to have constant access to high-speed internet. We need a solid internet connection at home for personal browsing and video streaming, as well as for a work-from-home setup with professional video conferences every other hour. As a result, having a fully functional and secure home Wi-Fi network is imperative.

Wi-Fi plans will be worthless if we do not properly set up a home network. It’s not difficult to set up a home Wi-Fi network. Looking to improve the performance or security of your wireless network? To properly configure your router and wireless network, follow these simple steps.

  1. Get the right router: Getting the right router is the first step in setting up a home WiFi network. It’s important to think about things like the distance between the router and the connected devices, the level of interference based on the number of devices operating nearby, the transfer speed required, and security. The latest type of wireless encryption, WPA2, is recommended for the router.
  2. Connect the router to the modem: The WAN/WLAN/Internet port on the router should then be linked to the modem with an Ethernet wire. The router must be turned on.
  3. Connect the computer with Ethernet cable: Although it is not always necessary, using an Ethernet cable to connect the computer’s LAN port to the router allows you to adjust the wireless Wi-Fi settings without risking losing your connection to the network.
  4. Install router software: Users should install the software that comes with the router on their computers. Users should next give their home Wi-Fi network a name, select a security level, and create a long password.
  5. Open configuration page: Users must connect to the router’s configuration page using a web browser if the router does not come with software. The router’s web address must be typed into the web browser. This information can be found in the router’s manual or other resources. You must also enter your login and password. The manual contains all of these details.
  6. Enter the internet connection information: Users must then input their IP address and DNS information in the next step. This information may be entered automatically by the router, but if it isn’t, it can be obtained by connecting to the ISP.
  7. Secure the router: Securing the router is an often ignored but critical step in setting up a home network. A well-protected router can protect all of the devices on the home WiFi network from malicious threats and hacker cyberattacks. Changing the default username and password, updating the router firmware, enabling the router firewall, establishing a guest network, and so on are all crucial tasks in router protection.
  8. Set the wireless settings: Users can alter the name of the home Wi-Fi network that appears on a device when it detects the network in the wireless settings. For best security, the security encryption should be set to the most recent version, which is usually WPA2. In this section, users can also enter and set a strong password of their choice.
  9. Place the router appropriately: The router must be properly placed in a position that allows the new Wi-Fi connection to have maximum coverage once the wireless settings have been adjusted and saved. Any physical barrier between the Wi-Fi router and the devices, such as concrete walls and pillars, will prevent users from accessing the optimal Wi-Fi network.
  10. Connect a device: Then, any Wi-Fi-enabled device can connect to the home Wi-Fi network. The device will start by looking for a network. Users must input the password enabled by the WPA2 encryption when the SSID appears. The Wi-Fi network will be connected to the device. Users can then test the network using any web browser. It’s important to do your homework in order to get the best Internet services.

That’s all there is to it. With this guide, you should be all set to go at this point. If not, it’s time to contact our specialists for more learning and assistance with your concerns.


Book a Demo