Positioning Mesh WiFi | Proper Placement of Mesh WiFi | Tricks Mesh Won’t Miss a Spot

Even if you have your internet service provider’s (ISP) fastest package, it doesn’t guarantee that you’d get that speed. Location, along with various factors, plays a crucial role in your internet speed. As a result, the best positions are often above ground level, in line of sight of the connecting device, and within range of devices. However, these factors are subject to constant change, depending on your type of home and use. 

So if you’re looking for the best place for a mesh wi-fi router, you’re in the right place. Read this to learn how to keep Wi-Fi as fast as possible.

Where Should I Put Mesh Wi-Fi In My House?

Ideally, you’d want to place your mesh wifi router in an area above the floor, away from obstructions or electronics, and within range of your devices, typically this is a living room or kitchen for many households.

Start with Proper Equipment

Before you learn where to place your mesh wifi router in a multi-level home, you should always start with the right equipment. There’s no use in knowing where to place an extension if your router can barely cover a couple of rooms.

Therefore, you should try opting for a wired mesh network that can initially cover at least 1,500 square feet- the average size of small homes and most apartments. Similarly, if your router is outdated, you should try upgrading to a model that supports dual-band connections and wireless 802.11ac networking.

Where to Place Your Wi-Fi Devices

Many factors play into knowing where to place a mesh wifi router in a multi-level home. These could include the construction type, home size, layout, areas of regular use, and placement of mesh nodes. Similarly, the larger your house is, the more Wi-Fi extensions you’d need. In general, you should expect the following from homes of different sizes:

  • Up to 2,200 square feet: Only a single mesh Wi-Fi router would suffice
  • Up to 3,800 square feet: A mesh Wi-Fi router with one extension point
  • Up to 5,400 square feet: A mesh Wi-Fi router with two extension points
  • Up to 7,000 square feet: A mesh Wi-Fi router with three extension points

How to Improve Coverage

If your Wi-Fi is currently poor only in certain areas of your home, your problem may lie in its coverage. The following are some tips for knowing where to place your mesh Wi-Fi in a multi-level home for the best coverage:

  • Reposition your router: A reoccurring issue for many homes is a poor line of sight. You can fix this by simply keeping the router in direct view of all extensions and devices; you should try avoiding obstructions such as aquariums, walls, or doors. 
  • Compromising for the sake of your mesh network: Since extension points depend on each other correlating, you need to ensure that each is appropriately positioned. So, if an area lacks coverage, you need to consider moving your router to a different location for a better connection.
  • Higher ground: You’d ideally want to place your devices somewhere above ground, possibly on a shelf, for better coverage.
  • Adding extensions: If none of the above methods work, you can always invest in another Wi-Fi extension. They’re a cheap and easy way to increase coverage directly.

Where Do You Put A Router In A Split-Level House?

When considering where to place your mesh Wi-Fi in a multi-level home, you should always aim for central locations. They provide the most beneficial reception while leaving room for mesh nodes.

Book a Demo

Ways to Make Your Wi-Fi Faster

Avoid Other Electronics

Most people commonly overlook interference from other electronic signals. In general, you need to avoid any other large metal objects or electronics, especially when they’re near walls or large obstructions. (5 tricks to make sure your Wi-Fi never misses a spot, n.d.)

Similarly, places near microwaves, in particular, are a no-go; they emit a strong interfering signal of 2.4GHz, which is the same frequency as your router.

Those Funny-Looking Antennas Matter

Often found in pairs of two, these antennas can vary from none to up to eight. By and large, you can use them to channel signals to a particular direction. And, you can point them in perpendicular directions for maximum coverage and speed.

Try Mapping the Signal

When considering where to place your mesh Wi-Fi in a multi-level home, you should account for everything. As a result, when nothing works, you can always just try mapping out the coverage of your devices. Since you know the approximate range of each router and extension point, you can draw it on a piece of paper to indicate dead zones.

Does Mesh Wi-Fi Work Between Floors?

Yes, a mesh wifi router can broadcast signals from every direction; this includes above and below floors. Yet, the connections are usually beefier when there’s less distance between travels. Consequentially, it’s recommended that you keep nodes directly above or below the primary router.

While it may seem logical to have the router inside a cabinet in an extreme corner of the house to minimize wire clutter, that every decision could be the root cause of your Wi-Fi woes. Ideally, the router should be located centrally in your house and mounted high on a wall or resting on a top shelf so as to provide coverage as evenly as possible across your home. In addition, the Wi-Fi router needs an open space away from walls and obstructions to transmit better signals and to prevent overheating. 

Keep your router away from interfering devices, as cordless phones, older Bluetooth devices, microwave ovens and other interfering devices operate on the same frequency and can cause WiFi congestion. The router should also be positioned away from reflective and metallic surfaces such as mirrors and fish tanks, which can block Wi-Fi signals. [¹]

Examples of Unit Position within the Home

Though you might have a general idea now, finding ideal coverage can still be a challenging process. Thus, the following is a complete guide to finding the best coverage for the layout of your home.

The first step is to know where to place your initial unit. Ideally, you’d want it to be somewhere that can be cabled to your router while being close to the areas with the most traffic. Similarly, places that require the best coverage would need as many extensions as possible.

Generally, you should always consider your house’s layout first. The best locations are usually those with central positioning; so, you should try placing extensions evenly while avoiding outer walls. Likewise, you should get a good understanding of the reach of each unit and try to avoid “dead zones” within your network.

As a rule of thumb, like a range extender, area a 2nd node between the router and the dead zone, however restriction the distance to two rooms (about 9 meters) or less. If you use a couple of satellites, follow the two-room rule.

Where do you place mesh nodes?

For optimal coverage, you should try placing nodes halfway between your router and a dead zone. Similarly, you should try mapping out the range of devices to ensure that the distance between two nodes isn’t ever beyond 30 feet.

Book a Demo